Dewalt is a company known for making good drills but should you buy its DCD777C2? In this review we will be focusing on Dewalt DCD777C2 and why is it so popular among users.
Dewalt is a well-recognized name and has been in the American houses for the last century. It is popular for its saws, cordless drivers, and impact drivers.
Dewalt DCD777C2 is a cordless drill that provides excellent torque and speed for drilling purposes. It works efficiently and provides sustainability in the tasks. It is made from a high-quality material which gives it extra strength.
It is a lightweight drill machine that is good for all types of drilling. Whether you are looking to drill wood or ceramic, it can get the job done. It is good for houses and commercial purposes.
It is powered with a lithium ion battery of 20V. Although the battery is the only factor we didn’t like about it, it delivers more run time over brushed.
Before getting into our review, here are a few important points you should consider before buying a cordless drill.
Also Read: Best RV Roof Sealants
The power of cordless drills is measured in battery voltage. A good-quality drill has a power range from 9V to 18V. The higher the voltage, the more it can drill holes.
The purpose of the clutch is to disengage the drive shaft of the drill. It helps protect the motor when there is a lot of resistance in screw-driving or bolt-tightening. The clutch should have 24 settings for the clutch, so, it can be adjusted according to need.
Most drills nowadays have two options for speed; low and high. Speed can vary from drill to drill but normally a good-quality drill has a speed of 800 rpm. The powerful drills have an even speed of 1000 rpm but 800 rpm is great for regular usage.
Before buying the drill, make sure to check its weight and balance. Try different positions to check if you are comfortable holding it. Some cordless drills have rubber cushioning for better grip. Make sure to check the clutch settings and how keyless chuck operates.
If you are buying the cordless online, look for their customer reviews or reviews from websites like ours.
Chuck is a part which has jaws. These are used to hold the tool in a place. They are the ones responsible for drilling. The capacity of chuck jaws on most drills is 3/8 inches. Modern drills have a keyless chuck that is used for turning or opening the chuck jaws.
Now that we have completed the essentials of a good cordless drill. It is time to move to our Dewalt DCD777C2 review. Some questions need to be addressed before going to our review. The answer to these questions will help you in choosing Dewalt DCD77C2.
- How durable is the drill?
The entire body of the drill is made from plastic. It can handle regular drilling tasks.
- How long it can last?
The battery of Dewalt DCD777C2 can last for several weeks or even months depending on the workload.
- Can it drill concrete?
Yes, it can drill concrete. But it is best to avoid drilling concrete with it.
- Does it come with a warranty?
Yes, the company offers 3 years limited warranty and a year of free service. It also provides 90-day money back guarantee.
Now we will move to our main review. First we will talk about its specifications, then its special features and then on giving our personal experience on its features and specifications.
Specifications of Dewalt DCD777C2
- Speed: 0-500/0-1750 RPM
- Weight: 2.5 lbs.
- Chuck Type: Plastic
- Battery: Lithium-ion of 20V
- Clutch Settings: 15
Special Features of Dewalt DCD77C2
- Ergonomic grip for comfortable handling
- Lightweight fits perefectly in tighter spots
- LED light for drilling in dark places
- Delivers more run time in a brushless motor.
First and foremost, let’s talk about its drilling. Its drilling performance can be evaluated from three different surfaces i.e. solid door, spade bit, and gauge steel sheet.
With the 5-inch hole saw, it cuts through the solid door without any fatigue. It uses high power throughout the drilling process and the best thing is that it does the whole cutting procedure in just 17 seconds.
Dewalt DCD777C2 easily makes through the 1-inch spade bit. It passes through the wooden surface in just 5 seconds. But it can slow a bit on the spade bit.
For the steel sheet, it drills the metal of ¼ inch and ½ inch quite comfortably. The larger drill of ½ inch takes just 4 seconds and the smaller drill of ¼ inch takes only 2 seconds.
The three-surface test shows how easy it is to drill on different surfaces with Dewalt DCD777C2. The test didn’t use the concrete surface as it is not a good idea to drill on a concrete surface with it. Although the company says it can drill on the concrete surface but we don’t recommend it.
The test on different surfaces shows its ability to drill without any hassle. We love the fact that it can do the drilling process in no time.
- Driving Test
The driving performance of any cordless drill is measured in terms of how quickly it can move its fasteners and can it properly set the screw heads?
The screw use in this test in 3-inch long. DCD777C2 handles the 3-inch long screw powerfully. It sets the head of the screw perfectly on the surface of the wood and gives you complete command on the screw.
In the next driving test, the screw use is 5-inch long. Again DCD777C2 drives the screw comfortably and cuts through the wood in no time. The 5-inch long screw can’t drive directly on the surface and you have to drill pilot holes first.
In terms of speed, both the screws (3-inch and 5-inch) drill through the surface in no time at all. This speed is even greater than most of the top models.
The driving test is what separates DCD777C2 from the rest and we were quite satisfied with its driving.
One of the feature of a good drill is how conveniently you can use it. Some drills don’t fit in the hands others don’t have a strong grip.
DCD777C2 is a lightweight drill and has a firm grip. It has two different gears for torque and speed. So, you can adjust the speed and torque according to your project needs.
Its chuck can carry a ½-inch shank (part of the tool connecting the handle to the operational end). This is very useful especially in drilling through the wall.
There is a work light which is located above the trigger. The light stays on for about 20 seconds after pushing the button.
Dewalt DCD777C2 comes with a kit bag. In the bag, there is DCD777C2, battery and a user manual. It is super easy to install even if you don’t read the manual. But you should read it anyway for safety purposes.
You can remove the batteries with the help of a locking tab. It doesn’t tell if the battery is running low but has a long-lasting battery.
Also, there is an option for the belt clip. It doesn’t come with the belt clip, so, you have to buy it separately.
Overall, Dewalt DCD777V2 is a convenient cordless drill and won’t create too much trouble for you.
DVD777C2 is designed to work for long hours due to its stronghold and weightless abilities. It has an ergonomic handle and doesn’t make the hands sore after the drilling.
It weighs only 2.5 lbs. so, taking it to different places won’t be a problem. Also, it will help in carrying it. It has a cooling brushless motor which increases its lifespan and protects it from overheating.
There are two gears in its structure for the speed control. The lower gear is from 0 to 550 RPM and the higher gear is from 0 to 1750 RPM. Additionally, there is a trigger for the LED light which is located on its front.
One drawback of the design is its chuck is made from plastic and feels a bit even when working.
Apart from plastic chuck we love its design and really like its ergonomic handle.
DCD777C2 includes two lithium-ion batteries having the power of 1.5 amperes. These batteries have a total voltage of 20V and they can be removed easily with the help of a trigger. The battery charges very quickly. It just takes 1 hour to fully charge the drill.
However, in terms of longevity, these batteries are slightly on the lower side. The life of batteries works differently for different surfaces. For example, it can drill only 3 holes of 1-inch with 9-inch screws on the spade bit. It completes only 5 full cycles before dying out.
Apart from this, if you are using a brushless motor, it stays on for a longer time.
We think the battery life should have been more. So, that it can match other features of DDCD777C2.
Now that we have completed our explanation of DCD777C2, it is time to summarize our review. First, we’ll talk about the things we liked and then the things we don’t like.
- Things we liked
First off we liked its design. The ergonomic handle and the firm grip don’t soar your hands when drilling.
Second, we love the inclusion of the LED light. This light is very helpful in dark places and you don’t need to carry an extra torch.
It is very easy to use because of its weight (2.5 lbs.) and can be set without any fuss.
The two-stage trigger changes gear (0-500 RPM and 0-1750 RPM) is the another feature we liked about it.
Next, the brushless motor works very well. It produces 500 lbs. of torque power which is suitable even for newbies.
The three-surface test shows how easy it can get the job done. It cuts through every surface with every screw measurement.
The speed with which it drills is better than its counterparts.
The batteries take only 60 minutes to fully charge themselves.
Finally, Dewalt DCD777C2 is an affordable drill. When compared with other drills of the same price it is far greater functions.
- Things we didn’t like
Its chuck is made from the plastics which can cause trouble sometimes. The plastic chuck can get loose and stop the drill for proper locking.
Batteries are another main concern for us. The charge can die quickly leaving your work incomplete.
The drill is not designed for working on the concrete. We would have loved an all-in-one drill but didn’t get it.
Some customers review that the LED light can get dim at times. Also, it is not long-lasting.
Should you buy it?
That’s the question you had in mind when you visit our website. Dewalt DCD777C2 is for everyone looking durability, affordability, and speed in their drilling. Yes, we know it has some flaws like the battery time is low and the chuck is made from plastic, but overall it shows tremendous performance.
What we think is that it is for a person looking to drill some holes here are there and not for a construction worker. It is ideal for household usage. Due to its battery life it is not ideal for many workers.
- Affordable Price
- Smooth ergonomic design
- Brushless motor to protect from overheating
- Drills faster
- Option for belt clip
- Works on every surface
- The chuck is made from plastic
- Batteries life needs improvement
- Not suitable for concrete surfaces
Concluding our Dewalt DCD777C2 review, we think that Dewalt DCD777C2 is a must-have for every house. It is ideal for beginners to start their drilling experience. The overall vibe about it is superb. We would have liked to give it 4.8/5 rating but due to its battery and plastic chuck, we give it 4.4/5 rating.
is a dynamic writer, known for reviewing the products and services throughly and honestly. The writer serves various online communities with his sheer tech knowledge.