Now, today’s hunt is just about to begin. And today, we are going to net the best chop saw for you. These chop saws are actually built with the motorized mechanism installed with the blade to achieve your work with the most exceptional quality AND in no time due to its fast-cutting blade which works instantly than the ordinary chop saw. And why need to use the chop saw in the modern world where you are available to choose the best options that can get your job done quickly and within minutes than the traditional and out-dated system? Having the unit of chop saw in your possession; does not mean only the professionals can have it and use but other folks that find great interest in DIY tasks, that is going to be one excellent addition in your garage to perform your many small jobs, and that would also save you hundreds of dollars every year by doing these all by your own. So, we are listing up some best chop saw that you can find over the internet and read all of the information that would help you to decide which one to go with. In the end and remember, a chop saw is going to be your savior, mind it!
The Best Chop Saw
As we said, we are just about to begin hunting the best chop saw.
Go through them and see which one is the fit for your needs.
1) 14-Inch Quick-Change D28715 Chop Saw by DEWALT
This DEWALT D28715 is indeed the old model chop saw motorized machine, but it is still being used widely throughout the world and is considered amongst the best chop saw machines.
With having the quick-change saw which you can easily replace by the time, it gets rusted, or the edges get even or broken and can be loaded with another 14 inches of the chop saw blade which you can easily find from the market (offline and online.)
It is used and replaces the most-used hand saws to perform the professional-grade work which only the skillful person can do.
Loaded with the powerful 15.0 AMP or 5.5 hp (the maximum horsepower rate of the motor) can bear the most pressure even with cutting through the woods or such materials where the motor can meet with the overload capacity. Still, it would not halt or near to the chances of getting fried.
Another thing about the quick-change blade where the operator can just plug out the blade wheel without the use of a wrench, and it makes the most convenient job whenever you got to need to change the blade in the middle of doing the critical cutting stuff.
Need to cut the materials from an angle? This quick-fence free and 45 degree adjustable fence gets you to move the blade angle to the faster and accurate angle cuts, and you would need to just cut the things out in straight form all the time.
With the quick-lock vise for fast clamping the materials that come with any and different sizes to which it would not require you to first chop the things with your hacksaw and clamp them up for the cut.
Handles being ergonomically designed to not make you feel the pressure when the motor gets started. As for the motor, it starts with the soft mode and then picks up the gear to make the motor to last for years to come.
Weighs about 39 pounds but it does make it cone compact and potable chop saw which you can take anywhere with you and place over any surface.
- Old model but still in the game
- The quick-change blade without the need of using wrenches or relevant tools to undo and place back the blade
- 14 inches of wheel size
- Motor with 15.0 AMP or 5.5 hp
- 45 degrees of adjustable fence to get the fine quality of mitered cuts
- Handles made with ergonomic standards
- Fast object clamping with the quick-lock vise
- Falls under the expensive price slot
- A little heavy in weight with 39 pounds
- Need good power at the time of start
2) 37160 Micro Chop Saw from Proxxon
4,000 RPM with 100 to 120V AC and 200W along with 50 to 60Hz but still, Proxxon comes with this micro chop saw that has the quietest but powerful motor to grind through most materials.
With its 24 tooth carbide tip blade with the size of 3-1/8 inches and made with the polycarbonated protection and is covered with the automatic swings for the safer operation and to keep your hands and fingers protected against any unfortunate mishaps.
The 45 degrees of the miter cuts get through both directions with the positive stops at 15-degree intervals to get the finest quality of cuts.
And the self-centering clamps with the integrated tightening gets the wood and other materials clamped up safely and you would need to adjust them to get on the right position without touching with your bare hands/fingers and you can get the cuts in round pieces through V-groove, and the front to side groove for clamping the thin objects.
For the lightweight chop saw, this one fits well for you as for only having 13.2 pounds but still, it would not shake when putting to the work.
- Rated between 50 to 60 Hz
- Runs at well over 4,000 RPMs at max.
- Blade made with 24 tooth carbide tip that size up to 3-1/8 inches
- Totally portable
- Safe clamping mechanism
- Get the cuts in V-groove and front to side grooves
- Lightweight with 13.2 pounds of weight!
- Miter cuts to 45 degrees
- Would need about 200W or 100 to 12V of AC
- Generates sparks, so be careful about it
3) 14 Inches HPT CC14SFS Portable Chop Saw by Metabo
Our third pick is from Metabo, the manufacturer of this HPT CC14SFS portable chop saw to make our jobs easier.
You can place it on your trunk and take anywhere you go especially if you are professional and often called in to perform the various cutting work where the chop saw machine is required.
So, this portability feature gives you the freedom to take the machine with you every day you go to work and take it back with you.
By the way, this machine was originally named Hitachi Power where it was renamed to Metabo HPT, but expect the same quality and the durability which you mainly expect from Hitachi-made tools.
Loaded with the powerful enough motor of 15 AMPs and 200 watts to get you through the toughest jobs where the low-rated machines cannot easily do and are kind of impossible to do with the manual hack saws.
With the quick-lock and the release vise give you the fast-changing of the materials to install and uninstall off the machine with the simple adjustment to get the Miter cuts to up to 45 degrees in either direction; forward and backward with the good 4,000 RPMs to get your pieces cut within seconds.
Best used for cutting the woods, pipes, rubbers, and as such materials in a professional way.
- Hitachi-made machine (old name)
- Miter cuts to 45 degress in both directions
- Gains the round speed of 4,000 RPMs
- Best to cut wood, pipes, rubbers, and more.
- Motor with 15 AMPs or 200 watts to get through the objects easily
- Portable and ready to go with you anywhere
- None found to be called as the cons for this extremely-powerful chop saw machine!
4) Abrasive 14 Inches 6.5 HP Chop Saw by Ironton
And here we come up with the abrasive chop saw with the size of 14 inches that is ready to cut through the rubber and iron pipes, threaded rods, conduit, square tubing, and the wood as well.
Having being loaded with the 6.5 horsepower and 15 AMP motor which operates with 110V to get up to well over 3,800 RPMs with the no-load speed that means it would not halt the blade even with running at the full speed and under the load capacity touching to the maximum of it.
For getting the cuts in mitered form, this chop saw angles up to 45 degrees to get the pieces cut in the beautiful but required angles to fit and fix the joints to one another.
Need to get even the good cuts, this machine makes the round rod cut to 4 inches in diameter and the square bar stock to up to 3-1/2 inches.
It includes the abrasive wheel of up to 14 inches with the wrench to tighten it up and not vibrate during the operation.
- 14 inches of the blade size
- The powerful motor comes with 6.5 hp or about 15 AMP that kick start with 110V
- Gain 3,800 rounds with no-load speed to get your tough jobs done
- 45 degrees of saw angles
- Abrasive type of saw blade
- And… NONE found to this awesome Ironton chop saw machine!
5) 15 AMP PCE700 14 Inches Chop Saw (Pack of 4)
Another powerful motorized chop saw we are proud to list, is from Porter-Cable.
They present us with the 14 inches of wheel size with the motor of 15 AMP which is able to provide us the round speed of up to 3,800 RPMs with the replaceable brushes in case you lose them over the time and get with the new ones.
With its quick-release clamp to install and uninstall the objects that you aim to cut, this would not take much of the time to drag them away from the machine.
It comes with the cutting fence for the greater adjustment to get the mitered cuts whereas the objects do not lose the place and you receive all the finest quality of cuts that the professionals demand.
And the base made of the pure steel brings you the stability to place it evenly over most of the surfaces and that would not make you feel the vibration and jerks, also the spark deflector halts the machine to not produce any sparks that are hazardous to you and the environment you would be working around.
Best used for cutting the PVC pipes, iron rods, wood, and other such materials with its abrasive blade edges.
- Pack of 4 chops saw machines that come with 14 inches of the blade
- Quite reasonably priced
- Fence with the miter adjustment to get the pieces cut differently than the straight
- Base with the heavy and high-grade steel
- Does not create sparks even when operating with the high speed
- 15 AMP motor to get the maximum of 3,800 RPMs
- Best used for cutting through the PVC pipes, rubber, and wood objects
- May feel issues in cutting the hard objects such as slow cut time
Conclusion time of best chop saw
Our hunted list of the best chop saw includes the very professional to the general use to perform through the most hectic to the basic kind of the cutting jobs where the chop saw is the only machine (and the option, too) to get your jobs done fine and nice.
With all the pros and cons, these pointers would help in deciding which one to go with.
But be mindful of the fact that, chop saws cannot be put on to work for a long duration.
I meant you could not just keep it running and grinding through the objects without a single second of wait to cool it down and even if the blade or machine tells you can keep it running for long.
To protect your chop saw, you should be aware of what kind of material you are about to clamp up over the machine and the time you should put it to work for; make sure to use them mildly, and you would notice your chop saw is going to last for a lifetime.
Adeel Sami is the lead contributor to our blog, NerdsHD.
And he is the blogger by passion as he loves the words. The only aim of him is to write in the interesting format to arouse the interest of the readers.