The best airflow case is what? Of course, to provide the best ventilation through different possible angles to keep our rigs cooled down naturally. Even if the room temperature is maintained with the air conditioner but a computer case that has just a bit of space to pass in and out the airflow, the use of air conditioner would not help at all. If your computer case comes designed with the bad airflow system, expect the degraded performance when your rig is set through to experience the optimum level of the load while playing your favorite games. And in the worst-case scenario, you may face one or two fried components if used continuously with the high load. While most gamers complain of the high load due to low-profile computer peripherals mainly the graphic cards and RAM but that is not just due to the same. The heat without ventilation to pass through the computer cases do add up to some extent to cause the high load and degraded performance. Even with installing the radiator fans, and such would not bring much of the relief if your computer case is stuck with few ventilative spots. So to deal with the situation, examine what kind of computer case you got first. And when you find out yours is as bad to get replaced/changed then do it with the best airflow cases which we got for you! ๐
Table of Contents
The Best Airflow Cases
One brilliant feature that we should look with the best airflow cases, is they all should have the maximum of mesh front panels to allow the maximum air intake to go and pass.
Do not go for the solid or glass-tempered computer cases because they do look good but are limited with providing enough ventilation which is what we would not tag them into our list of best airflow cases.
And here we start with our list to present you the best airflow cases to enhance your performance and reach the highest of computer components’ reach without the noticeable effect due to high airflow passing in and out of the cases.
1) Focus G High Airflow Case by Fractal Design
And here we start with our first pick for the list of best airflow case that is ready to be in your home.
If you are looking for the computer case in the compact size, go no further because this Focus G case has enough space to fit-in the high-performance components right into it with the best utilization of space that it got within.
Any of your big to small-sized computer peripherals are going to get fit without any trouble.
With the larger side window that comes open, show off to the world that what you got inside. But not only that, this open side panel helps you in keeping the check of noises to understand what might be happening with the hardware, and to which one.
Loaded with two preinstalled 120mm fans to clear all the heat out of the case and bring the high airflow to let the fresh air pushed into the case to cool down everything even they are running with the high load, and the fans come from Fractal Design Silent Series LL which are quite durable and generate no to little voice.
But the suspense does not end here… This Fractal Design comes with the open space to install six more 120mm fans whenever you want, so do not feel that you are just left with the option to only go with two fans to cool down your rig.
Air intakes installed over the front, top, and to the base with the filtered form to provide the best dust-free experience because the dust is the murdered of the electrical components and with having the same concept, this Fractal Design‘s Focus G is renowned to be referenced as one of the best airflow cases.
Install anything from high-end CPU coolers, multiple radiators, and the graphic cards to up to 380mm in size, and more and they are ready to be fit along the way where you would not have to compromise with not switching up any of your loved components due to space issue AND all of the loaded components get the maximum air to keep them cooled down all the time.
Pros
- Focus G model from Fractal Design loaded with 120mm fan pre-installed fans for enhanced airflow
- Fans with little to no noise thanks to Fractal Design Silent Series LL
- May easily install six more 120mm fans for later use
- Air intakes placed over the top, front, and to the base
- Weighs only about 1 lbs which is the unmatched feature as compared with many specific airflow cases
Cons
- May face issues with fitment of your hardware included with heatsinks
- Cluttered with the pool of cables on the backside of the case
Also Read: Best RGB Cases
2) Crystal Series 680X by CORSAIR
Our second in the line is the masterpiece from CORSAIR, the leading name in producing the world’s best computer cases that are equally admired all around the world.
And this one is the same; going to be admired not just due to its design but to its best airflow-backed design to provide the optimum cooling to the hardware.
This CORSAIR Crystal Series 680X comes with four loaded and pre-installed fans and the Direct Airflow Path layout just whirls the fresh air through the components and delivers the high and maximum airflow going in and out of the computer case. So anything that is causing you trouble and getting heat up after a while, now that trouble is going to get fixed for good! ๐
With three tempered glasses fitted on to the side panel, top of the case, and to the front provide the stunning view of your high-end computer components.
Three fans that come installed on the front are included with the LL120 RGB to illuminate your system with up to 48 and customizable RGB LEDs and with the list of compatible CORSAIR liquid coolers.
Even if you are setting up your custom components to build the custom rig with your chosen and best computer hardware, and this CORSAIR computer case is not going to be clutter anyhow. With the distinctive dual chambers, that provide the bigger space to fit in your most components in any size with keeping the pool of cables out of view even from your own self. ๐
All in all, this CORSAIR Crystal Series 680X makes the perfect computer case which is fancy as well as designed with the responsible concepts to provide not enough but the perfect airflow to keep everything happy and cool. ๐
Pros
- Smart airflow case for even smarter ATX motherboard series
- Layout made with Direct Airflow Layout
- Four dedicated fans for optimum airflow passing in and out of the case
- 3 front fans LL120 RGB lights that are customizable up to 48 different colors
- Dual chambers to connect as much hardware you want
Cons
- A bit heavy in the weight, to up to 25.57 lbs
- Pretty expensive, too
- Possibly face the issue with trying to install a 280mm radiator
3) High Air Flow HAF 912 from Cooler Master
The HAF series by the Cooler Master is proud to have another one to add which is specifically named HAF 912.
If we are asked to take a pick of what is the best amongst the best airflow cases, and we might pick this HAF 912 from Cooler Master up.
Why?
Simple. Because of its design… Nope?
Not just that but it comes integrated with two powerful 120mm fans to provide the best thermal solution to cool down high-end CPU coolers and the radiator.
But not just that, it also has the more powerful installation of up to six 120mm fans within its design for the better, accurate, and superior airflow movement to keep all of your twelve hardware starting from Radeon HD5970 and Nvidia GTX 480 cooled down during the operation.
So with the combination of eight massive performing 120mm fans, expect the generation of best airflow and thus, it makes it one of the best airflow cases as well.
By the way, these collection of these fans are based upon providing the best quality by reaching to their maximum 0f 1200 RPMs and keeping the noise at very low level to up to 17 dBA so that when the fans are put to work with their full force and reaching to their limits, you would not hear much of the noise coming out of their fans and the motors.
Pros
- Two 120mm fans to cool down your radiator and CPU coolers
- Six more 120mm sized fans to achieve the intense quality of airflow
- All fans reach to the maximum RPMs of 1200
- Causes 17 dBA of noise which is acceptable
- Front I/O for easy access
Cons
- Front panel and PSU intakes found to be dust-free while side and top panels are open
- May deal with the ordeal to mount the 2.5 inches of hard drive
4) NEO Air High Airflow Case by Metallic Gear
Designed with the visible mesh over the front panel, this NEO Air case from Metallic Gear has this one specifically produced for getting all of the fresh air straight to the components and provide the level of performance to keep the cool airflow blowing in.
The integrated RGB controllers that are programmed to the pre-installed two counts of Skiron RGB cases that sync up with the motherboard to change the colours the way the motherboard operates, this view is totally stunning!
With the I/O features to plug-and-play most of the computer components like 2x 3.0 USBs, headphones, mics, reset button, power button, and the RGB controllers that are easily attached to the case which most of the new folks can hook up with and without the proper guidance.
Have the motherboard from the ATX family,? Feel not worried as this NEO Air compact designed mid-tower computer case can hold it up easily.
Pros
- The RGB controllers that make it the Skiron RGB computer case
- Easy putting the I/O features to plug-and-play most of your common components
- Front penal designed in the meshed form
- Hook up your 280mm of the radiator without any trouble
Cons
- No visible cons spotted with this exclusive piece of best airflow case!
5) Versa N21 Snow Edition by Thermaltake
Made with the glossy top and front panels that are designed accordingly to the need and look of the gamers, and this one indeed matches the gamers’ taste.
The heightened foot placed on the bottom to stand the case adds the unique feature to pass through the best airflow without obstruction.
And the triangular transparent side windows add to the stunning view this Versa N21 Snow Edition gives!
With the pre-installed fan with 120mm in the size as the rear exhaust fan just blows out the heat which may put an effect over the performance of each and every single component you have your rig installed with.
And another two optional fans with the size of 120mm work as the intake fans which keeps the dust to go through the filter and keep your case to not attract any dust.
Need to mount ATX-sized motherboards, this case comes with the pre-made holes to easily mount them.
Whereas you can also install CPU cooler that is of the size of about 160mm, a radiator that goes up to the top, and the 160mm long graphic cards to build the rig with heavy-duty hardware.
Pros
- 120mm of a fan placed on the rear exhaust end
- Two optional 120mm fans which you can install anytime
- Can easily mount most ATX-sized motherboards
- CPU cooler and the radiator along with graphic cards in the sizes of 160mm get to be mounted with ease
Cons
- No grommets on the case
- Plastic parts are flimsy
Also Read: Best RV Roof Vents
Conclusion time of the best airflow case
So, what are you waiting for?
These 5 of the best airflow case are ready to be in your possession.
For the games, it is a must to have; to get their expensive hardware mounted inside the best airflow case.
Even if you are not the gamer, you equally need to have one of these kinds of cases to keep your computers cooled down.
So, I am so sure you are definitely gonna try them, and I expect a thankful note from you very soon! ๐
Adeel Sami is the lead contributor to our blog, NerdsHD.
And he is the blogger by passion as he loves the words. The only aim of him is to write in the interesting format to arouse the interest of the readers.